1. Make sure the motor is clean. During the use of geared motors, a certain amount of dust and dirt will accumulate over time, which will affect the effectiveness and efficiency of gear transmission. Therefore, it is recommended that after the motor is stopped, spray the surface of the motor with detergent, and then wipe the motor housing and gears with a dry cloth. Such maintenance can prevent corrosion and wear for a long time.

2. Lubricate the motor regularly. After the geared motor is used for a period of time, heat will be generated from the friction surface of the gear. When the temperature is too high, it will cause serious wear to the transmission gear. Therefore, it is recommended to use appropriate lubricating oil to lubricate the motor gears to reduce motor wear and improve transmission efficiency to ensure the normal operation of the motor.

3. Check the geared motor cable. As a component that connects the motor and the power supply, the cable also carries a large amount of current, so it is very important for the stability and safety of the motor. Regularly check whether the cable sheath is intact, whether the welding head is tight, and whether there are cracks. Checking these problems in advance can avoid potential safety hazards.

4. Motor troubleshooting. If there is an abnormality in the motor, such as loud noise, slow operation, heat sensation from the motor, etc., the motor needs to be checked in time. Use simple tools to remove the loose or worn bearings between the gear shaft and the bracket, check and clean, or clean the ventilation and cooling equipment. , to solve these problems and ensure the normal operation of the motor.